主要特性与技术指标

以 2.5 GSa/s 采样率和 14 位垂直分辨率生成 330 MHz 脉冲和 500 MHz 函数/任意波形；

用于高斯白噪声的可选波峰因数帮助工程师确定极限测试中应用到器件上的失真量，以便符合各种串行总线的标准；

无毛刺定时参数变化支持工程师在不需要漏失信号或毛刺信号的条件下改变频率，并能实现连续工作，而无需重启或重置被测件；

任意比型使用简单的码型设置显示通道电容负载。测试设计极限不再需要复杂的测量设置步骤。

330 MHz 脉冲、500 MHz 正弦波、660 Mbit 码型

Main features and technical indicators

330mhz pulse and 500mhz function/arbitrary waveform were generated by 2.5gsa /s sampling rate and 14-bit vertical resolution.

The optional crest factor for gaussian white noise helps engineers determine the amount of distortion applied to the device in the limit test to meet various serial bus standards.

The change of timing parameters without burr supports the engineer to change the frequency under the condition that no leakage signal or burr signal is needed, and can achieve continuous work without restarting or resetting the tested part;

Any bit code type USES a simple code type setting to display the channel capacitance load. Test design limits no longer require complex measurement setup steps.

330 MHz pulse, 500 MHz sine wave, 660 Mbit code type