$item.Name

首页>电工仪表>防静电产品>防静电包装材料

参考价:

  • 面议
低温冷绕试验机 防静电包装材料

具体成交价以合同协议为准

2023-01-30
型号
沧州润禄仪器设备有限公司

免费会员 经销商

该企业相似产品
公路仪器
产品简介
FZ-7401低温冷绕试验机导体断面积 100mm2 以下之试料在本机内冷却 1 小时后,立即以均匀之速度将试样绕卷于规定直径之圆杆上,断面积 100mm2 以上之试料则先行绕卷,再冷却相同之时间后,立即以反方向绕卷于圆杆上。试验后取出试样,检视试样表面是否产生龟裂、裂痕。
详细信息
产品详情

FZ-7401 低温冷绕试验机
CORD WINDING CRACK TESTER
UL1581,VDE,JIS-C3005
导体断面积 100mm2 以下之试料在本机内冷却 1 小时后,立即以均匀之速度将试样绕卷于规定直径之圆杆上,断面积 100mm2 以上之试料则先行绕卷,再冷却相同之时间后,立即以反方向绕卷于圆杆上。试验后取出试样,检视试样表面是否产生龟裂、裂痕。 
If the cross-sectional area of conductor is less than 100mm2,then specimen must be put into testing chamber for freezing for one hour,after that immediately rolls specimen around the specified rod in a uniform speed 。Otherwise,for the cross-sectional area over 100mm2,roll the specimen before hand and put into chamber for freezing one hour。Afterwards,immediately roll specimen around the rod in reverse direction。Finally,take out of specimen for checking whether its surface has crack or fissure or not。 

 内箱尺寸 Interior dimension   50x60x50cm
 冷却方式 Air-change rate   气冷式 Air Frozen
 温度控制器 Temp. controller   PID 数位设定 PID digital setting
 温度范围 Temperature range   室温 Room temp. ~ - 40℃
 控温精度 Accuracy   ±1℃
 夹具   Grips   3 组 (sets)
 圆杆   Rod   试料厚度的 1.5~2倍1.5 ~ 2 times the thickness of specimen
 材质   Material   内胆外箱均为 SUS304# 不锈钢
 电源   Power   AC380V / 50Hz
  
相关技术文章

同类产品推荐

企业未开通此功能
详询客服 : 0571-87858618
提示

仪表网采购电话